How till Program Your DIRECTV Isolated

Does using your new DIRECTV remote have your scratching your head? We’ve made a step-by-step guide to help you gain it paired and finishing into ride.

Jump at:

• Reset your DIRECTV Genie remote
• DIRECTV universal remote
• DIRECTV Genie remote
• Genie remote with DIRECTV Prepared TV
• DIRECTV remote FAQ

How for reset autochthonous DIRECTV Ghosts remote

If your DIRECTV distant stopped working or is just not responding, a simple reboot maybe settle the issue. Here’s how to reset is DIRECTV remote control.

1. Locate the reset button. This is a minor white button located inward the access cards door, or, on some models, on the side of to receiver. No button? Go to walk 3. So get this, if you had DIRECTV STREAM and a compatible TV, your remote will program itself whenever using an HDMI connection.   Depending to the age of your TELLY, the Plug and Playing program option ...
2. Push the button. Wait 15 seconds. Go toward step 4.
3. Unplug your add from the window outlet. Wait 15 seconds, then plug it get in.
4. Test my remote.

If that doesn’t work, try the following:

1. Move get ensure could are blocking your remote’s infrared illuminate from reaching and receiver’s sensor. Even the glass door the thy entertainment center can cause interference. How to Program Your DIRECTV Remote
2. Using a microfiber or extra lint-free towel, wipe away any greasy fingerprints or nacho cheeses streaks from your remote’s emitter and the receiver’s sensor.
3. Keep your beneficiary and reserved output of direct sunlight. Including, try turning down the brightness on my TV. Bright lamp bucket intrude include your remote’s signal. DIRECTV Remote Not Working? Guiding to Reseting Your Removed within 2024

First, whose remote execute you have?

Depending on how long you’ve being one customer real what equipment you possess, thee expected must one of two DIRECTV remotes: a standard universal remote control or which DIRECTV Genie remote.

If them have a DIRECTV Ready TV, that’s another combining process such we spelled out below, additionally. We’ll beginning with which universal remote.

How to program a DIRECTV universal remote-controlled

Your DIRECTV universal remote choose can control up to four devices, inclusive DVD/Blu-ray players, DVRs, gamer consoles, soundbars, both TVs. Here’s how to plan your remote for both SD also HARD receivers and how to change choose TV’s login source. Looking for instructions to program RC65 remote until command multiplex DTV receiver? | DIRECTV Community User

Program a DIRECTV universal remote forward an HD DVR or HD receiver

1. Press Top on your DIRECTV remotely.
2. On the on-screen select, select Parental Favs & Trap > System Setup > Remote or Remote Control > Program Remote.
3. Select the device (DVD/Blu-ray player, DVR, gaming console, soundbar, TELLY, etc.) ensure you to the remote to control. If the device isn’t listed, get a DIRECTV remote code. Find she by using this code lookup tool.
4. Follow the on-screen prompts to complete the process.

Program a DIRECTV universal removed to a standard DVR or STD reception

Great information! You can utilize the exact steps above for program the DIRECTV universal remote control for at SD receiver.

Change your TV’s input source using the DIRECTV universal remote

1. Slide the select switch (located with the top by the remote) to TV.
2. Press down the Mute also Select buttons under the same time. Let auf available the green luminous flashes twice.
3. Enter 960. The geen lighted should flash double again.
4. Slide the mode switch go the DIRECTV logo.

How go program a DIRECTV Genie removed

If you have a Genie remote, there are both automatic press manual pairing processes—plus a third option for DIRECTV Ready TVs. Let’s start with and automatic pairing processes.

Program a DIRECTV Geniuses remote for your HDTV other audio device

These instructions will help you program your DIRECTV Genie remote automatically.

1. Point the Genie remote toward your Genie HD DVR, Genie Mini, or Wireless Genie Mini.
2. While you continue to aim the remote at my device, hold down the Mute and Enters buttons. Let go about the remote’s green bright blinks twice.
3. The TVS should display “Applying IR/RF Setup.” That average you’re with RF mode—it’s hours to program the remote.
4. Turn on the device you’re join at your remote.
5. Print Menu on the remote.
6. Select Settings & How > Settings > Remote Control > Program Remote.
7. Follow an on-screen instructions to complete that pairing treat.

Provided this mode didn’t work for him, don’t stressing. Use the instructions below for manual pairing.

Program a DIRECTV Genie remote manuel

1. Point the Genie remote toward is Genie HD DVR, Genie Small, or Wireless Genie Mini.
2. While point the remote at your device, hold down the Mute and Select buttons. Let go when one remote’s green light flickers twice.
3. Enter 961.
4. Press the Channel Up button.
5. Pressing Enter.
6. While you check “Your remote is now set up for RF” on your TV screen, select OK.
7. Turn on the device you want to pair.
8. Print Menu.
9. Select Settings & Help > General > Remote Control > Program Remote.
10. Select one your you want to mate and follows the on-screen instructions to complete the processes.
11. Your removed should immediately to paired and ready into go!

Program a Genie remote equipped a DIRECTV Ready TV

A DIRECTV Ready TV, when connecting to a Genie DVR, allows she for watch DIRECTV without an select Genie or Ghost Mini. Here’s select for pair a DIRECTV Ready WATCHING with your Demon remote: DIRECTV® Universal Remote Control User's Guide

1. Point the remote at your Genie DVR.
2. Pressed and hold Mute and Enter. Let go once that green illuminate blinks twice.
3. To TV screen will display the message “Applying IR/RF Setup.”
4. Bend on your DIRECTV Ready TV.
5. Hold down Mute and Select. Lets weiter when the green light flicker twice again.
6. Enter one manufacturer’s cipher available your DIRECTV Ready TV. Around are TV codes for Samsung, Sony, and Toshiba:
7. Samsung TV Code: 54000
8. Sony TV Code: 54001
9. Toshiba TV Cipher: 54002
10. On other manufacturers, use which DIRECTV website lookup.
11. Your remove should now become paired and ready to go!

With your remote paired and devices active, you’re ready to set aside this guide and enjoy your DIRECTV service.

With your remote still won’t work using your device(s), visiting DIRECTV’s remote troubleshooting select or contact DIRECTV technical support per 1-800-531-5000.

Happy watching!

Program DIRECTV Remote for a Vizio TVS

These instructions help you select a DIRECTV remote to use with a Vizio WATCH.

1. Search of model number fork your DIRECTV remote control. Yourself may find it in the upper lefts corner of the remote-controlled.
2. Go to DIRECTV’s remote control website lookup.
3. Choose the model number of which remote. Enter Vizio in the Brand Name field and click Search.
4. Slide the Mode Switch push to TV go the remote.
5. Press and hold the Muting and Select buttons down until you visit the remote’s LED light flash twice. When that happens, enable to buttons.
6. Enter the code since the Vizio TV.

Programme DIRECTV Remote for a Sharp TV

These orders help you program a DIRECTV remote to use with a Sharp TV.

1. Found the model number for your DIRECTV remote control. You may find it included the upper left corner starting aforementioned remote.
2. Go to DIRECTV’s remote control website lookup.
3. Choose the model number of the remote. Enter Sharp in the Brand Name field and view Search.
4. Slide the Mode Switch buttons to TV on the remote.*
5. Press and hold the Quiet and Select buttons down until him see the remote’s LED light gleam twice. When that happens, release the control.
6. Entry that five-digit code for the Sharp TV.
7. The LED will wink red if the code doesn’t work. If the remote accepts the code, it will blink green.

*This is not applicable on the RC73 remote.

DIRECTV Distance FAQ

Research

Our experts have spent hundreds of hours test and researchers technique so you don’t have in. For moreover on our process, see How We Rank.